Archive for fteightysix

Helix V2 Side Markers

We just got in the new Helix Version 2 Sidemarkers for the 86/FRS/BRZ Platform. These will fit all models of the car from when the car was release until current models.  These are a Smoke Side Marker with a built in LED that has a really nice effect, but we will let you decide. We installed a set of these on our Shop 2017 BRZ.

Watch the Video below for tips and trick on the install, The socket has to be pushed down in the bumper well area.

Link to Purchase

https://www.86speed.com/products/helix-smoked-amber-led-v2-side-markers.html

Helix side markers 2018-06-06 15.32.35 2018-06-06 15.34.33 2018-06-06 15.34.50 2018-06-06 15.35.04 2018-06-06 15.35.45 2018-06-06 15.36.22

 

 

Link to Purchase

https://www.86speed.com/products/helix-smoked-amber-led-v2-side-markers.html

 

86 Speed

 

EcuTek releases BRZ RaceRom v10 public beta – Flex Fuel, Boost control, closed loop fuel, custom sensors and more…

 

Ecutek

BRZ, GT86, FT86 & FR-S

RaceROM v10 – Early access beta

EcuTek have been busy updating RaceROM for the BRZ / FR-S / ’86 and we want you to get involved. We’re offering early access to the latest version 10 developments as part of a beta test program so we can continue to deliver the best product on the market!Delivering exciting new features such as Flex Fuel and Boost Control, version 10 will be a significant update.

Highlights

Easy to Calibrate Flex Fuel

RaceROM Updates

Using our Flex Fuel experience gained during the constant improvement of our GT-R platform, we’ve added the same easy to tune strategy to BRZ. Just configure your 0-5v Ethanol content sensor using our new Custom Sensors frame work and you’re all ready to start start tuning.Flex Fuel Key Features

  • Fuel quantity correction for overall ethanol content
  • Ignition and fuelling offset maps combine with 2d blend maps
  • Ethanol content hold stops erroneous drops in ethanol content caused by fuel aeration
  • Manual Ethanol content override per Mapswitch Mode allows for premixed fuel using the same strategy
  • Comprehensive live data support allows tuners to see individual corrections

BRZ Flex Fuel has never been easier!

Boost Control

BRZ now has dedicated boost control so no more custom maps required! A comprehensive strategy allows for integration into the OEM torque control while still allowing boost to be limited using gear, RPM and Mapswitch Mode.Boost target control:

  • Torque demand based boost target to integrate with factory control
  • Per MS mode limit of boost target using gear and RPM
  • Adjust target using ECT, EOT, IAT and AM for safety
  • Further adjustment available using Custom Maps

Wastegate duty control:

  • Dedicated wastegate base maps for high and low atmospheric pressure makes tuning boost for different altitudes easier than ever
  • Throttle threshold for integral activation
  • RPM threshold for overall wastegate activation
  • Atmospheric pressure dependent boost level for integral activation
  • Gear and IAT based wastegate duty multiplier
  • Further adjustment using custom maps

Boost limit throttle cut:

  • Close the throttle automatically in case of overboost

Custom Sensor Inputs

You no longer need to define third party sensors using custom maps, as we have added purpose made sensor definitions for commonly used sensors. These custom sensors have their own dedicated live data parameters which can be logged, used in Custom Maps and used in strategies such as Flex Fuel.

Closed Loop Fuelling

While it has been possible to use custom maps to do closed loop fuel control at full load, this new dedicated strategy makes it easy to configure and tune.

  • Dedicated logging paramters
  • Use a wideband configured in custom sensors instead of OEM sensor
  • Proportional – Integral control strategy
  • Adjustable feedback using load and RPM

Custom Map Updates

We’ve updated Custom Maps to work with the new features, added more inputs and outputs, more timing options and the ability to choose how input axis’ are used. Crucially we’ve added inputs for the VVT active status and VVT intake error so tuners can set up a failsafe condition for disabled VVT, turn on the CEL or create a SD VE correction map in custom maps.Additional Inputs:

  • AFR Actual
  • AFR Target
  • AFR Wideband
  • Boost Target
  • Coolant pressure
  • Ethanol Content
  • Fuel Pressure
  • G Force Lateral
  • G Force Longitudinal
  • Gear Shift Sensor
  • Injector open Time DI
  • Injector open Time PI
  • Knock Correction
  • Launch RPM
  • Launch RPM Error
  • VVT Enable
  • VVT Exhaust Angle
  • VVT Intake
  • VVT Intake Error
  • Wheelslip
  • Wheelspeed Front
  • Wheelspeed Rear

Additional Outputs:

  • Boost Target
  • SD Volumetric Efficiency
  • Torque Actual

Input axis Interpolation options:

  • Interpolate between cells
  • Select nearest cell
  • Select lower cell
  • Select higher cell

Speed Density Updates

To help correct airflow calculations for the effects of atmospheric pressure we’ve added a simple compensation map to our speed density strategy. You can also blend between MAF and SD to avoid step changes on cars with challenging MAF scaling. We’ve also added more live data to help with speed-density tuning.

Enhanced Datalogging

Factory OBD logging methods have proven to be wasteful when using them for tuning as a typical logging session only utilizes one third of all the data that the ECU sends. To improve this we have replicated commonly used factory OBD parameters with specific RaceROM parameters. Furthermore we have optimized all our RaceROM logging parameters to minimize data size and waste.The combination of all our improvement has typically tripled logging speed,  increasing it from 13Hz to 40Hz using our default logging parameters. Logging speed also remains high when more RaceROM parameters are added.

 

Shop Ecutek now!

www.86speed.com

 

NEW DBA High Performance Brake Pads

SP500 Street Performance Brake Pads 

  • Copper Free Ceramic
  • Low dust
  • Reduced NVH
  • Fast Bedding due to scorched finish
  • Consistent pedal feel
  • Compatible with T2, X, T3, XS performance rotors

The SP500 is for drivers seeking improved braking performance without the compromises associated with an aggressive, track-style pad. This pad can operate at temperatures in excess of 500°C (900°F), whilst maintaining excellent stopping power and pedal feel. The SP500 features Copper Free Ceramic technology, which provides low-dust and low-noise operation and reduced environmental impact on our waterways and marine life. READ MORE

 

pad-xp650XP650 Track/Heavy Load Performance Brake Pads

  • Race pad-like friction level
  • Fast Bedding due to scorched finish
  • Maintains stable friction at high temperatures
  • Suitable for very heavy towing loads
  • Suitable for use with all DBA 4000 & 5000 Series performance rotors
  • Best with DBA T3 slotted rotors

The XP650 is ideal for applications where high temperature performance is required. This pad features a Kevlar metallic formula, and can comfortably operate at temperatures in excess of 650°C (1200°F), while maintaining excellent pedal feel. The XP650 is perfect for passenger cars being used in high-temperature applications (such as track day events), as well as 4X4 applications where high heat is generated by heavy towing loads or heavily outfitted vehicles. LEARN MORE…

 

pad-xp735

XP+735 Circuit Performance Brake Pads

  • High initial friction
  • Fast Bedding due to scorched finish
  • Firm pedal feel
  • Designed for operating at maximum temperatures
  • Suitable for use with all DBA 4000 & 5000 Series performance rotors
  • Best with DBA T3 slotted rotors

The XP+735 is designed for track/circuit use, where prolonged high temperatures are expected. This pad formula is enhanced with carbon fibers to help combat extended temperatures in excess of 735°C (1300°F). The XP+735 provides a very firm pedal feel and maintains stable friction at high temperatures. Available primarily for performance applications, but also ideal for use with heavy armored vehicles. SHOP NOW

CHECK OUT THIS GREAT KIT!!

DBA BRAKE PADS